NCARB 4.0_Building Layout_1st try

Interior Layout & Building Layout Vignettes

NCARB 4.0_Building Layout_1st try

Postby dryerase » Sat Aug 27, 2016 6:03 pm

I went for fastest design without much alignment between floors, except staying in the lower floor footprint. Any comments would be great!
Bldg Layout 001_sm.jpg

Bldg Layout 002_sm.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
dryerase
 
Posts: 94
Joined: Fri Jan 02, 2015 4:24 pm

Re: NCARB 4.0_Building Layout_1st try

Postby dryerase » Sun Aug 28, 2016 3:24 pm

I'll point out that my Social Worker office on the 2nd floor is badly proportioned, but that's the only thing I've been able to pick out that may be a problem. Let me know if anyone else sees anything! And thanks!
User avatar
dryerase
 
Posts: 94
Joined: Fri Jan 02, 2015 4:24 pm

Re: NCARB 4.0_Building Layout_1st try

Postby rpm716 » Mon Aug 29, 2016 8:35 pm

Multi-purpose Room- requires 2 exits. One door should be swinging towards egress (corridor)
Locker Rooms - should have an additional door.

*** Suggestions

Verify Elevator is not smaller than 7' in one direction.
Is Small meeting room "near" Large Meeting Room
rpm716
 
Posts: 2
Joined: Thu Dec 03, 2015 8:02 pm

Re: NCARB 4.0_Building Layout_1st try

Postby dryerase » Tue Aug 30, 2016 7:42 am

Thanks, I actually tested yesterday afternoon. I'm fairly certain I complied with the things you pointed out here, hope to report a PASS next week!
User avatar
dryerase
 
Posts: 94
Joined: Fri Jan 02, 2015 4:24 pm


Return to SD - SCHEMATIC DESIGN

Who is online

Users browsing this forum: No registered users and 47 guests

cron